top of page
TOOLPATH DESCRIPTION
CAVITY & CORE MACHINING TOOLPATHS
ROUGHING THE CAVITY
Roughing is carried out with MODEL REST AREA CLEARENCE strategy. Using smaller tool every next roughing toolpath helps to clear the...
vjagtap64
Apr 24, 20211 min read
8
0
CAVITY RELIF MACHINING
The relief is the biggest area in the core or cavity. In this specific part the relief has mostly flats and a few steep surfaces which...
vjagtap64
Apr 24, 20211 min read
3
0
CAVITY SEAL OFF MACHINING
Seal off area is semi-finished with model rest are clearance, removing stock leftover from roughing and finishing with steep and shallow...
vjagtap64
Apr 24, 20211 min read
3
0
CAVITY PART MACHINING
Using constant Z, steep & shallow, raster and 3D offset strategies the core part was fully machined. The core part had some region where...
vjagtap64
Apr 24, 20211 min read
5
0
ROUGHING THE CORE
Most common roughing strategy used to rough the part. From D4.0 to D0.5 tool used for roughing the part to clear out majority of the...
vjagtap64
Apr 24, 20211 min read
2
0
RELIF PART SEMI-FINISH & FINISH
Steep and shallow strategy is mostly used in areas which combines both steep (straight) walls and shallow (flat) areas. Isolating only...
vjagtap64
Apr 24, 20211 min read
1
0
SEAL OFF MACHINING
Seal off is the area which touches the other half of the core/cavity and rest part of the mold is relived or reduced. Using Raster...
vjagtap64
Apr 24, 20211 min read
1
0
CORE PART MACHINING
Using various strategies such as constant Z, optimized constant Z, Raster and corner pencil finishing , to finish the main core body...
vjagtap64
Apr 24, 20211 min read
3
0
ROUGHING THE CAVITY
Roughing is carried out with MODEL REST AREA CLEARENCE strategy. Using smaller tool every next roughing toolpath helps to clear the...
Apr 24, 20211 min read
8
0
CAVITY RELIF MACHINING
The relief is the biggest area in the core or cavity. In this specific part the relief has mostly flats and a few steep surfaces which...
Apr 24, 20211 min read
3
0
CAVITY SEAL OFF MACHINING
Seal off area is semi-finished with model rest are clearance, removing stock leftover from roughing and finishing with steep and shallow...
Apr 24, 20211 min read
3
0
CAVITY PART MACHINING
Using constant Z, steep & shallow, raster and 3D offset strategies the core part was fully machined. The core part had some region where...
Apr 24, 20211 min read
5
0
ROUGHING THE CORE
Most common roughing strategy used to rough the part. From D4.0 to D0.5 tool used for roughing the part to clear out majority of the...
Apr 24, 20211 min read
2
0
RELIF PART SEMI-FINISH & FINISH
Steep and shallow strategy is mostly used in areas which combines both steep (straight) walls and shallow (flat) areas. Isolating only...
Apr 24, 20211 min read
1
0
SEAL OFF MACHINING
Seal off is the area which touches the other half of the core/cavity and rest part of the mold is relived or reduced. Using Raster...
Apr 24, 20211 min read
1
0
CORE PART MACHINING
Using various strategies such as constant Z, optimized constant Z, Raster and corner pencil finishing , to finish the main core body...
Apr 24, 20211 min read
3
0
bottom of page